HINGE CONFIGURATION REVIEW RECORD — BLANK REVIEW TOOL
Non-standard OEM project briefing tool. Not a capacity certificate, installation instruction or manufacturing approval.
Use project and role identifiers only; no personal data. Leave unknown fields open.

PROJECT AND PANEL
Project reference:
Panel/configuration ID:
Drawing revision and status:
Dimensions and units (width/height/thickness):
Finished or provisional dimensions; measurement reference:
Glass construction / appearance / relevant cut-outs:
Mass value and units:
Mass basis (measured / calculated / supplier-declared); source:
Components included / excluded from that mass:
Movement and proposed mounting type:
Actual support / pivot geometry; do not assume an edge hinge:

HARDWARE AND SUPPORT
Manufacturer / exact model / variant:
Hinge quantity and positions; drawing reference:
Mounting arrangement covered by the evidence:
Wall/backing or fixed-panel support record:
Fixing/support reviewer role:
Door swing / adjacent fixtures / handle projection:
Door-edge gaps and clearance evidence / drawing reference:
Open clearance conflicts and responsible role:

DOCUMENTED CONDITIONS — COPY FROM APPLICABLE SOURCE, DO NOT ESTIMATE
Document title / issuer / issue or revision:
Page / section / date obtained:
Weight condition; whether for single hinge, set or installed door:
Width condition:
Glass conditions:
Mounting / glass preparation / clearance conditions:
Other stated prerequisites:
Applicability to the proposed supply confirmed by / record reference:
Conflicting sources and fields:
Supplier clarification reference:

OPEN-DECISION LOG
Item | Confirmed input | Missing evidence | Responsible role | Next action | Status
     |                 |                  |                  |             |
     |                 |                  |                  |             |

REVIEW AND RELEASE
Documents reviewed and configuration revision:
Open matters that prevent release:
Glass preparation coordinated with hardware document:
Confirmed component list / drawing revision:
Approval role and reference, if agreed:
Changes after review and affected decisions to reopen:

Do not infer capacity by dividing or multiplying a set rating. This form contains no default hinge count, spacing, allowable door size or glass-working procedure. The article's idealized moment comparison must not be used as a product selection calculator.

REVIEW TRIAGE — EDITORIAL AID, NOT APPROVAL
Current decision: incomplete evidence / conflicting or changed configuration / ready for responsible support and drawing review
Reason and affected drawing item:
Required evidence to close this decision:
Responsible role and follow-up reference:
Do not mark a hardware-document match as manufacturing approval.